Audio control, General operation, Adjusting the detail of audio control – Kenwood KDC-MP408U User Manual
Page 6: Msriw
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
General Operation
Audio Control
Function ofKDC-X492/KDC-MP408U
You can adjust following Audio Control items;
Adjusting the detail of Audio Control
You can adjust the following Basic Audio Items in
datail: Bass level, Middle level, and Treble leval.
№kstmcM№8n
Phri« ......
...
Rear volume*
"R-VOLUME"
0 — 35
Subwoofer level
"SUB-W L"
-15 —+15
Bass level
Bass Boost**
"B.BOOST-L"
"L1'7"L2'7"0FF"(The
indicator turns on according to
the setting.)
Bass Center Frequency
"BASSF"
40/50/60/70/80/100/
120/150 Hz
System Q
"NATURAL"/
Natural/User setting/Rock/
Bass Q Factor
"BASSO"
1.00/1.25/1.50/2.00
"USER'7"R0CK'7
"P0PS'7"EASY'7
"TOP40'7"JAZZ"
Pops/Easy/Top 40/Jazz
(The indicator turns on
according to the setting.)
Bass Extend
"BASS EXT"
OFF/ON
Middle level
Bass level
"BASSE"
-8 —+8
R a M M ' 1
Middle level
''MIDI"
-8 —+8
Middle Center Frequency
"MID F"
0.5/1.0/1.5/2.0kHz
Treble level
"TREE"
-8 —+8
Middle Q Factor
"MID Q"
1.0/2.0
Balance
"BALANCE"
Left 15 — Right 15
Fader
"FADER"
Rear 15 — Front 15
Treble level
Exit Audio Control mode (Volume control mode)
Msriw
*Function of KDC-X492/KDC-MP438U/KDC-MP408U.
Treble Center Frequency
"TRE F"
10.0/12.5/15.0/17.5 kHz
• "USER": The customized Bass, Middle, and Treble levels
are effective. On the KDC-X492/KDC-MP438U/KDC-
MP408U, this item can be selected at any time. On the
KDC-MP338, this item is displayed only when the tone
quality has been adjusted. On the KDC-MP338, this item
disappears when another setting is selected.
• You can set Bass, Middle, and Treble for each source.
1 Select the source to adjust
Press the [SRC] button.
2 Enter Audio Control mode
Press the Control knob.
3 Select the Audio item to adjust
Press the Control knob.
4 Adjust the Audio item
Turn the Control knob.
5 Exit Audio Control mode
Press any button.
Press a button other than the Control knob or ^
button.
1 Select the Basic Audio item
For how to select Basic Audio items, see <Audio
Control> (page 6).
2 Enter Detail adjustment mode of Audio
Control
Press the Control knob for at least 1 second.
3 Select the Detail Audio item to adjust
Press the Control knob.
4 Adjust the Detail Audio item
Turn the Control knob.
5 Exit the Detail Audio Control mode
Press the Control knob for at least 1 second.
When you set the Bass Extend to ON, low frequency
response is extended by 20%.
You can exit the Audio Control mode at anytime by
pressing any button except for Control knob or A
button.
KDC-X492/KDC-MP438U/KDC-MP408U/KDC-MP338