Instructions – RCA COLOR TV NCJ11 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Instructions
1. Repeatedly press MENU to select SETUP MENU
and then press + or - to display the setup menu.
Mute
Wideo M^nu
wjdio Menu
i Setup Menu
2. Repeatedly
press
MENU to
select
function,
then press
+ or - to
adjust it.
i
.> Timer: 0:00
fSet Alarm
IChan Label
parental Ctrl. Off
IC^'Ctri: Normal
SWifoprogram’ **
!pianMem: Stored
JVntenna A
»Cable/AIr: Cable
:VCR 1 Chan: Off
*VCR2Chan- Off
Cable Chan: Off '
‘blockSet -Hr +Min‘
I
f # # i
/ /' A- ■
i* ^
The setup menu will automatically disappear
from the screen if you do not press + or -
within a few seconds.
Via remote control, your TV will “remember”
which function you displayed last-even after the
menu has disappeared from the screen. So, if you
want to adjust the same function again, simply
press the + or - button on the remote control.
The last function you adjusted will appear on the
TV screen.
18
The
CAPTIONING
feature lets you display as text on the screen the audio
portion of certain programs encoded with the Closed Captioning (CC)
information. Two types of closed captioning are available: Captions 1 and
Captions 2. Select Captions 1 for full translation of the primary language in
your area. Captions 2 is used for secondary language translation, simplified
English, or whatever is being transmitted in your area. Two Text modes are
also supported. Details are on page 19.
By setting the
SLEEP TIMER,
you can program your TV to turn itself off
after a certain period of time. This is useful whenever you want to watch TV
for an hour or so before going to sleep. Press the + or - button to select the
length of time you want the TV to stay on.
You can program your TV to turn on and/or off at the times you choose by
setting the
ALARM
function.
CHAN LABEL
lets you program names (or labels) for the channel numbers,
i The names you select will then appear on the screen whenever the channel
number is displayed.
I The
PARENTAL CONTROL
feature lets you lock out any channels that you
I don’t want your children to watch. Pressing + or - switches this function
i from
OFF
to
ON.
When this function is set to
ON,
channels that have been
i locked out with the C/iAV CTRL function cannot be viewed. When this
I
function is set to
OFF,
all channels can be viewed.
I
The
CHAN CTRL
(Channel Control) function works hand-in-hand with the
I
PARENTAL CONTROL
function. It lets you select the channels you want to
I
lock out. First select the channel number you want to lock out and then
I
press + to change this function from
NORMAL
to
LOCKED.
When the
PARENTAL CONTROL
function is set to
ON,
the channels you locked with
I this function cannot be viewed.
i When you press + or - to start
tht AUTOPROGRAM
function, the TV will
’ automatically cycle through all channels and place the active channels for
i your area in its channel memory. Pressing the
CHANNEL
up or down
I
buttons will then allow you to scan only active channels.
I
The
CHAN MEM
function allows you to erase and add channels to channel
I memory as desired.
j Because your TV has two separate antenna inputs on the back labeled
ANT A
and AiVT
B,
you can connect two different signal sources, if desired.
By pressing + to change the
ANTENNA
function, you can switch back and
forth between the two signal sources. Each time you press +, the antenna
input will change.
The
CABLEIAIR
function tells your TV whether you have a cable-TV system
or a home antenna connected to the TV. Your TV is so automatic that you
will probably never need to change this function. When your TV
autoprograms, it automatically adjusts the
CABLEIAIR
setting for you. If
you should ever need to override the automatic setting, press + or - to
change it.
The
VCR 1 CHAN
function lets you program to which channel the TV will
automatically tune when you press the
VCR I
button on the remote.
The
VCR 2 CHAN
function lets you program to which channel the TV will
automatically tune when you press the
VCR 2
button on the remote.
i
The
CABLE CHAN
function lets you program to which channel the TV will
^ automatically tune when you press the
CABLE
button on the remote.
i After you set the clock, you will be able to see the on-screen time display
whenever you change channels or press the
DISPLAY
or
TV
button on the
remote control. To set the clock when this function is selected, first press
I and hold - to set the correct hour (including AM and PM). Then press and
^ hold + to set the correct minutes.