Scrambled cable-tv channels – RCA COLOR TV NCJ11 User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Follow one of these steps to connect a cable-TV system to your TV instead of a home antenna.
Since cable-TV systems vary, you may wish to consult your local cable-TV company for additional information.
You can connect the cable-TV system to either
ANT A
or
ANT B
as explained on page 25.
Follow this diagram if your cable company does not require a converter/decoder box (no scrambled channels):
CABLE/ANTENNA
Incoming
Cable
m-
BACK
OF TV
B
Follow this diagram if your cable company requires a converter/decoder box that can be controlled by remote control.
Most brands of remote-controllable boxes can be controlled by the remote that came packed with your TV.
Details for programming your TV’s remote to also control the converter/decoder box are on page 35.
See diagram D if you want to connect a VCR.
CABUE/AKTENNA
Incoming
Cable
CONVERTEFVDECODER BOX
Remember to tune your TV to the
output channel of the converter box
(usually 2, 3, or 4) when selecting
channels via the converter box.
BACK
OF TV
Follow this diagram if your cable company requires a converter/decoder box that cannot be controlled by remote control.
Scrambled Cable-TV Channels
Some cable-TV decoders require that you manually switch
from regular to scrambled channels on the decoder
whenever you wish to view the premium pay channels.
By connecting the decoder to the
ANT A
input and
CONVERTER
output on the TV as shown here, you can
switch between the scrambled and unscrambled channels
using the remote control.
To change the incoming signal from
ANT A
to
ANT B,
simply press the
ANT
(Antenna) button on the remote. Each
time you press the
ANT
button, the channel numbers will
change color on the screen to show which antenna signal
you are watching.
' Optional accessories are available from most RCA dealers and
electronics supply stores.
(ConvertBr/Decoder)
Nonscrambled cable channels will come thru
the ANT B
input
whenever the channel numbers are yellow. The scrambled
channel from the decoder box will come thru
the ANT A
input
whenever the channel numbers are blue. Be sure to leave the
decoder box set to the scrambled channel, and remember to
tune your TV to the output channel of the converter box
(usually 2, 3, or 4).
33