Number buttons, Prog (program) button, Ant button – RCA COLOR TV NCJ11 User Manual
Page 41: Rewind button, Ff (fast forward) button, Display button, Record button
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The digital remote control that came packed with your TV
controls your TV
and
up to two compatible RCA VCRs.
To control a compatible RCA VCR, first press the
VCRl
or
VCR2
button to put the remote in the “VCR mode”. The
buttons shown below will then control the VCR.
Selected models of RCA VCRs have a switch that lets you
determine which VCR will be controlled by the
VCRl
button,
and which VCR by the
VCRl
button. Other models have an
OFF/ON
Button
Press to turn off VCR.
Number Buttons
• Press two numbers to select
channel.
• Press a “0” before a single-digit
channel number.
PROG
(Program) Button
Used when setting the clock and
programming the timer.
ANT
Button -----------------------------------
Same as
VCR
or
TV/VCR
button on
front of VCR. Lets you record one
channel with VCR and watch another
channel on TV.
PAUSE
Button
• Press to pause play or record
mode.
PLAY
Button
Press to start tape playing.
REWIND
Button
• Press while VCR is stopped to
rewind tape.
• Press while VCR is playing to
search backward.
FF
(Fast Forward) Button
• Press while VCR is stopped to
fast forward tape.
• Press while VCR is playing to
search forward.
on-screen menu that lets you determine if it will be controlled
by
VCRl
or
VCRl.
Additional information about controlling
two RCA VCRs is in the note on the next page.
If you have another brand of VCR, you can probably also
program your remote to control it. Details are on the next
page.
VCRl
and
VCRl
Buttons
• Press to turn on VCR and put
remote in “VCR Mode” so other
buttons will control the VCR.
• Press the TV button to put remote
back into “TV Mode”.
CHANNEL
Buttons
Press to select the next higher or lower
channel in VCR channel memory.
DISPLAY
Button
Press to bring VCR’s displays to TV
screen.
CLEAR
Button
Used when setting the VCR’s
clock and programming its timer.
STOP
Button
Press to stop whatever VCR is doing:
Playing, Recording, Rewinding, or
Fast Forwarding.
RECORD
Button
Press to record.
Notes:
• The six VCR buttons grouped together
(PLAY, PAUSE, STOP, REWIND, FF,
and
RECORD)
control the VCR even if the
remote is in the “TV Mode”.
• TheAVT;
PROG, CLEAR, DISPLAY
buttons are for RCA VCR’s only.
39