RCA COLOR TV NCJ11 - Manual (Page 22)

By setting the Sleep Timer, you
can program your TV to turn itself
off after a certain period of time
(up to four hours).
This is useful whenever you want
to watch TV for an hour or so
before going to sleep.
Setting Sleep Tinier (with or without remote)
1. Repeatedly press
MENU
to select
SETUP MENU, and then press + or -
to display setup functions. Press
MENU to select SLEEP TIMER.
4. The sleep timer will begin to count
down to zero. The word
“SLEEP"
will appear on the screen whenever
you change channels or press the
remote’s
TV or DISPLAY huiton
to
let you know the sleep timer is
activated.
Mute
Video Menu
Audio Menu
Setup Menu
Captionino- Off
Sleep Timer: 0:00
i Set Alarm
rtîhan Label '
I Parental Control: bff
lili
2. Press the + or - button to select the
length of time (up to four hours) you
want the TV to stay on.
Each time you press the + or -
button, the time will increase 30
minutes (up to 4 hours). Then the
time display will start over.
Captioning' Off
ES.............
Set Alarm
Chan Label
Parental Control: Off
3. When finished, the display will
automatically disappear from the
screen in a few seconds. To make it
disappear more quickly, press the
CLEAR
button.
10:08 PM
Sleep 21
The amount of time remaining
before the TV shuts itself off will
appear in the sleep timer menu
whenever you display the
SLEEP
TIMER
function.
Off i
Set Alarm
Chan Label
Parental Control Off
1 hour
and
23 minutes
remaining
. When the sleep timer counts down
to 0:00, the sleep timer display will
appear on the screen for a few
seconds. Then the TV will turn
itself off.
If you want the TV to stay on when
this display appears, press the +
button on the remote to add more
time to the
SLEEP TIMER
display.
Clearing Sleep Timer
To cancel the sleep timer, enter the
SLEEP TIMER
function and then press
the + or - button until the screen shows
0
:
00
.
20