Using the rke transmitter – Chrysler 2013 Town & Country User Manual

Page 23

Advertising
background image

using a hand-held Key Fob with RKE transmitter. The
RKE transmitter does not need to be pointed at the
vehicle to activate the system.

NOTE:

Inserting the Key Fob with RKE transmitter into

the ignition switch disables the system from responding
to any button presses from that RKE transmitter. Driving
at speeds 5 mph (8 km/h) and above disables the system
from responding to all RKE transmitter buttons for all
RKE transmitters.

Two RKE transmitters may be supplied with the vehicle.
Vehicles built without the powered options will be
equipped from the factory with three-button RKE trans-
mitters, and those built with power options will be
equipped with up to seven-button RKE transmitters.

Using The RKE Transmitter

Three-button RKE transmitters will provide basic UN-
LOCK, LOCK and PANIC functions.

Seven-button RKE transmitters will provide functions
that allow the same basic operation as the three-button,
but may also be used to operate the power liftgate

Key Fob With Three-Button RKE Transmitter

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

21

Advertising