Auto up reset — if equipped – Chrysler 2013 Town & Country User Manual

Page 48

Advertising
background image

Auto Up Feature With Anti-Pinch Protection — If
Equipped

The front driver and front passenger switches may be
equipped with an Auto Up feature. Lift the window
switch fully upward to the second detent, release, and the
window will go up automatically.

To stop the window from going all the way up during the
Auto Up operation, push down on the switch briefly.

To close the window part way, lift the window switch to
the first detent and release when you want the window to
stop.

NOTE:

• If the window runs into any obstacle during auto-

closure, it will reverse direction and then go back
down. Remove the obstacle and use the window
switch again to close the window.

• Any impact due to rough road conditions may trigger

the auto reverse function unexpectedly during auto-
closure. If this happens, pull the switch lightly to the
first detent and hold to close window manually.

WARNING!

There is no anti-pinch protection when the window
is almost closed. To avoid personal injury be sure to
clear your arms, hands, fingers and all objects from
the window path before closing.

Auto Up Reset — If Equipped

To reactivate the Auto Up feature, perform the following
steps after vehicle power is restored:

1. Pull the window switch up to close the window

completely and continue to hold the switch up for an
additional two seconds after the window is closed.

46

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Advertising