Recirculation control – Chrysler 2013 Town & Country User Manual

Page 444

Advertising
background image

• If fog or mist appears on the windshield or side glass,

select Defrost mode and increase blower speed.

Recirculation Control

When outside air contains smoke, odors, or
high humidity, or if rapid cooling is desired,
you may wish to recirculate interior air by
pressing the Recirculation control button. Re-

circulation mode should only be used temporarily. A LED
will illuminate on the Recirculation control button when
Recirculation mode is selected. Push the button a second
time to turn off the Recirculation mode LED and allow
outside air into the vehicle.

NOTE:

In cold weather, use of the Recirculation mode

may lead to excessive window fogging. The Recirculation
mode is not allowed in Defrost mode to improve window
clearing operation. Recirculation will be disabled auto-
matically if this mode is selected.

Rear Automatic Temperature Control (ATC) — If
Equipped

The rear ATC system has floor air outlets at the rear of the
right side sliding door, and overhead outlets at each
outboard rear seating position. The system provides
heated air through the floor outlets or cool, dehumidified
air through the headliner outlets.

The rear system temperature control is on the front ATC
panel located on the instrument panel.

Pressing the Rear Temperature Lock button on the front
ATC panel, illuminates a lock symbol in the rear display.
The rear temperature and air source are controlled from
the front ATC panel.

Rear second row occupants can only adjust the rear ATC
control when the Rear Temperature Lock button is turned
off.

442

UNDERSTANDING YOUR INSTRUMENT PANEL

Advertising