Chrysler 2013 Town & Country User Manual

Page 429

Advertising
background image

2. Rear Blower Control — If Equipped

• Use this control to regulate the amount of air forced

through the rear system in any mode you select. The
rear blower speed increases as you move the control to
the right from the “O” (Off) position. There are seven
blower speeds. To allow the rear overhead control,
turn blower knob fully to the left, past The

ЉOЉ off

position into the “REAR” control position.

3. Front Blower Control

• Use this control to regulate the amount of air forced

through the system in any mode you select. The
blower speed increases as you move the control to the
right from the “O” (Off) position. There are seven
blower speeds.

NOTE:

For vehicles equipped with Remote Start, the

climate controls will not function during Remote Start
operation if the blower control is left in the “O” (Off)
position. Blower control should be left in the

ЉONЉ

position to allow the climate control to either warm or
cool the vehicle.

4. Rear Temperature Control — If Equipped

• Provides temperature control for the rear cabin. Turn

left for cooler or right for warmer temperature settings
in the rear cabin.

5. Right Front Temperature Control

• Provides right front seat occupant with independent

temperature control. Turn left for cooler or right for
warmer temperature settings.

6. Mix Mode

Air is directed through the floor, defrost and side
window demist outlets. This setting works best in

4

UNDERSTANDING YOUR INSTRUMENT PANEL

427

Advertising