Programming additional transmitters, Transmitter battery replacement – Chrysler 2013 Town & Country User Manual

Page 29

Advertising
background image

• For vehicles not equipped with the EVIC, perform the

following steps:

1. Perform this operation while standing outside the

vehicle.

2. Press and hold the UNLOCK button on a programmed

RKE transmitter for at least 4 seconds, but no longer
than 10 seconds. Then, press and hold the LOCK
button while still holding the UNLOCK button.

3. Release both buttons at the same time.

4. Test the feature while outside of the vehicle by press-

ing the LOCK/UNLOCK buttons on the RKE trans-
mitter with the ignition switch in the OFF position and
the Key Fob removed.

5. Repeat these steps if you want to return this feature to

its previous setting.

NOTE:

Pressing the LOCK button on the RKE transmit-

ter while you are in the vehicle will activate the Vehicle
Security Alarm. Opening a door with the Vehicle Security
Alarm activated will cause the alarm to sound. Press the
UNLOCK button to deactivate the Vehicle Security
Alarm.

Programming Additional Transmitters

If you do not have a programmed RKE transmitter,
contact your authorized dealer for details.

Transmitter Battery Replacement

The recommended replacement battery is one CR2032
battery.

NOTE:

• Perchlorate Material — special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

27

Advertising