Comtrol FreeWire - Manual (Page 11)

DeviceMaster FreeWire Installation and User Guide: 2000412 Rev. D Hardware Installation - 11
Port Parameters
Port Parameters
Note: The default IP address is 192.168.250.250.
Parameter Description Settings
CHARACTER bits per character 7, 8 (default)
FLOW flow control NONE (default), Xon/Xoff, CTS/RTS
PARITY parity
NONE (default), EVEN, ODD, MARK, or
SPACE
SPEED
baud rate (bits per
second)
300, 600, 1200, 2400, 3600, 4800, 7200,
9600, 14400, 19200, 38400, 57600, 76800,
115200 (default), 230400, 460800
STOP
stop bits per
character
1 (default), 2
MODE
line mode (serial port
protocol)
232 (default), Disabled
ECABLE
E-Cable mode (for
TCP connections
similar to serial
tunneling)
Enable, Disable (default)
(Originator; master only,
ECADDR
E-Cable destination
IP address
(set by user)
ECONN
E-Cable connection
attempt time
20 seconds
ECPORT
E-Cable destination
IP port number 9100 (raw data), 9200 (telnet) or set by
user