Comtrol FreeWire - Manual (Page 30)

30 - Web Browser and Console Configuration DeviceMaster FreeWire Installation and User Guide: 2000412 Rev. D
Using the Web Browser Interface
• Wireless - to
configure the
wireless settings
that match your
network.
• Admin - you may
want to configure network
access password and an
update password, which
prevents unauthorized
configuration changes.
7. To confirm wireless
operation:
a. Close the web browser
and disconnect the
Ethernet cable.
a. Re-open the web browser,
enter the IP address, and
verify that Server Info
web page loads.
Note: It takes
approximately 7
seconds before the
connection is
operational.
If the web page does not
load, see
Troubleshooting
on Page 47.
8. Refer to Connecting the Serial Device on Page 41 for serial port pinout
information.