Comtrol FreeWire User Manual
Page 37
DeviceMaster FreeWire Installation and User Guide: 2000412 Rev. D
DeviceMaster FreeWire Firmware - 37
Web Page
Web Page
You can use the following procedure to check the firmware version using the web
page.
Note: To communicate with the DeviceMaster FreeWire, the IP address must also
be valid for the network to which it is attached. The network segment must
be 192.168.250.x to communicate to the DeviceMaster FreeWire default IP
address of 192.168.250.250.
1.
Enter the DeviceMaster FreeWire IP address in your web browser. The Server
Info screen displays.
2.
Check the ftp site for a later version at
ftp://ftp.comtrol.com/html/default.htm
.
3.
If necessary, download the latest firmware and go to
on Page 38 to load the firmware into the DeviceMaster FreeWire.
Note: This example displays firmware version 1.35b.