Devicemaster freewire firmware, Checking the firmware version, Devicemaster freewire installation wizard – Comtrol FreeWire User Manual
Page 35
DeviceMaster FreeWire Installation and User Guide: 2000412 Rev. D
DeviceMaster FreeWire Firmware - 35
DeviceMaster FreeWire Firmware
After the hardware installation has been successfully completed, you should check
to see if the DeviceMaster FreeWire is loaded the latest firmware.
Checking the Firmware Version
There are several ways to check the firmware version:
•
DeviceMaster FreeWire Installation Wizard
•
FreeWire Manager
•
Web page
DeviceMaster
FreeWire
Installation Wizard
Use the following procedure to check the firmware version on the DeviceMaster
FreeWire after hardware installation.
1.
If necessary, start the DeviceMaster FreeWire Installation Wizard using the
desktop shortcut or Start/Programs/Comtrol/FreeWire/FreeWire Installation
Wizard.
The firmware version is displayed on the right side of the DeviceMaster
FreeWire information, next to the Status.
2.
Check the ftp site for a later version at
ftp://ftp.comtrol.com/html/default.htm
.
3.
If necessary, go to