Comtrol DM ATS-LNX - Manual (Page 20)

PCMCIA Network Cards 20
IP Configuration (802.11 and Ethernet)
The /etc/pcmcia/network.opts file looks something like this:
# Network adapter configuration
#
# The address format is "scheme,socket,instance,hwaddr".
#
# the "network address" here is NOT the same as the IP address.
# See the Networking HOWTO. In short, the network address is the IP
# address masked by the netmask.
#
case "$ADDRESS" in
*,*,*,*)
logger -p daemon.info "network.opts ADDRESS='$ADDRESS'"
INFO="Sample private network setup"
# Transceiver selection, for some cards -- see 'man ifport'
IF_PORT=""
# Use BOOTP (via /sbin/bootpc, or /sbin/pump)? [y/n]
BOOTP="n"
# Use DHCP (via /sbin/dhcpcd, /sbin/dhclient, or /sbin/pump)?
[y/n]
DHCP="n"
# If you need to explicitly specify a hostname for DHCP requests
DHCP_HOSTNAME=""
# Use PPP over Ethernet (via the pppoe package)? [y/n]
PPPOE="n"
# Use WHEREAMI (via the whereami package)? [y/n]
WHEREAMI="n"
# Host's IP address, netmask, network address, broadcast address
IPADDR="1921.68.4.97"
NETMASK="255.255.0.0"
NETWORK="192.168.0.0"
BROADCAST="192.168.255.255"
# Gateway address for static routing
GATEWAY="192.168.0.1"
# Things to add to /etc/resolv.conf for this interface
DOMAIN=""
SEARCH=""
# The nameserver IP addresses specified here complement the
# nameservers already defined in /etc/resolv.conf. These nameservers
# will be added to /etc/resolv.conf automatically when the PCMCIA
# network connection is established and removed from this file when
# the connection is broken.
DNS_1=""
DNS_2=""
DNS_3=""
# NFS mounts, should be listed in /etc/fstab
MOUNTS=""
# If you need to override the interface's MTU...
MTU=""
# For IPX interfaces, the frame type and network number
IPX_FRAME=""
IPX_NETNUM=""
# Run ipmasq? [y/n] (see the Debian ipmasq package)
IPMASQ="n"
# Extra stuff to do after setting up the interface