Pnp/pci configuration – Comtrol DM ATS-LNX User Manual
Page 72
Appendix F. Changing BIOS Configuration
72
PNP/PCI Configuration
PNP/PCI Configuration
This menu is used to assign IRQ numbers to your PNP/PCI devices manually. This
figure illustrates the DeviceMaster ATS-LNX factory defaults.
•
PNP OS Installed: If you install a Plug and Play operating system (OS), the
OS will reassign the interrupt even if you choose Yes for this option. If you
install a non-Plug and Play OS or if you want to prevent the OS from
reassigning the board’s IRQ settings, choose No for this option.
•
Resources Controlled By: Select Auto if you want the computer to assign the
IRQs.
•
Reset Configuration Data: Enabling this field means you allow the
configuration data to be reset.
•
IRQ-xx assigned to: These fields show whether a certain IRQ is used by a
PCI/ISA card.
Manual
Used MEM base addr : N/A