Updating the driver – Comtrol DeviceMaster NS-Link User Manual
Page 21
Advertising
DeviceMaster Driver User Guide: 2000595 Rev. A
Updating the Driver - 21
NS-Link Device Driver Installation
Updating the Driver
Use the following procedure to update the
NS-Link device driver
after initial installation.
If you are unsure what driver version is running, see
1.
Locate the latest NS-Link device driver assembly (Page 7) and copy it to a
location that is available to the host.
2.
Close any applications that are using serial ports before the NS-Link device
driver installation.
3.
Start the update by executing the .exe file.
4.
Click Next to start the Installation Setup Wizard.
5.
Optionally, enter a different location to install the latest NS-Link device driver
files.
Advertising