Comtrol DeviceMaster NS-Link User Manual
Page 55
DeviceMaster Driver User Guide: 2000595 Rev. A
Loading Device Configuration - 55
Using Driver Configuration Files
3.
In the left pane, highlight the device for which you want to load the device-
level settings from the configuration file.
4.
Click Load Configuration.
5.
Browse to the location of the configuration file that you want to load.
6.
Highlight the configuration
file and click Open. The
configuration file loads in a
few moments.
7.
Make the appropriate
choice for your situation:
•
Click No to the
ComtrolApplet message,
if you are using the file
to set up multiple
devices with the same
device-level settings.
•
Click Yes to the
ComtrolApplet message,
if you are using the file
to restore a specific
device. For example,
you needed to remove and then re-install the DeviceMaster NS-Link device
driver.
8.
Click Apply so that the configuration is saved on the device.
9.
Go to the next procedure if you want to restore port settings from a
configuration file.