Emerson Radio SMV100 - Manual (Page 21)

20
Note-During timer setup, always check the AM/PM indicator (to the left of the
time) to ensure you make the correct settings.
Timer operation
While setting up the timer, make sure you carry out each step within 5
seconds, otherwise your entry will not be accepted in the memory and you
will have to start again.
Timer operation
The timer function allows you to set the unit to switch itself on and off
automatically, for example, to wake you up each morning.
1. Select the radio station or CD you wish to play when the unit switches
on. (For CD this can be a programmed selection of tracks if desired.)
2. Press MODE repeatedly until TIMER ON flashes at the right of the
display, then press MEMORY immediately.
The timer on (hour setting) will flash.
3. Immediately press + or - to set the hour, then press MEMORY .
The minute setting will flash.
4. Immediately press + or - to set the minute, then press MEMORY .
5. Press MODE repeatedly until TIMER OFF flashes at the right of the
display, then press MEMORY immediately.
The timer off (hour setting) will flash.
6. Immediately press + or - to set the hour, then press MEMORY .
The minute setting will flash.
7. Immediately press + or - to set the minute, then press MEMORY .