Emerson Radio SMV100 - Manual (Page 22)

21
To cancel the sleep timer, press SLEEP so that so that the word SLEEP is not displayed.
Timer operation
Note-If ever you find the whole time display flashing, the clock needs to be
re-set (see page 7). This could be due to the unit having been
disconnected from the AC outlet, or a power interruption.
The timer on and off times have now been set. To check them at any time,
press
MODE repeatedly to step through the TIMER ON and TIMER OFF settings on
the display.
8. To activate the timer, lower the front panel flap and press TIMER so
that TIMER appears at the right of the display.
9. Press to switch off the unit to standby.
Timer operation is now set. The unit will switch itself on and off at the set
times, every day.
Cancelling timer operation
If you don't want the unit to switch itself on, for example at weekends, press
TIMER (inside front panel flap) so that the word TIMER is not displayed. (The
timer settings are still retained for the next time you wish to activate the timer.)
To re-activate the timer, repeat step 8 above.
Sleep timer
The unit has a sleep timer. Activating it will make the unit will switch itself off
after 90 minutes.
To activate the sleep timer, lower the front panel flap and press SLEEP so that
SLEEP appears towards the right of the display.