Emerson Radio iC2196 - Manual (Page 8)

13 14
Random playback
To listen the tracks on a disc in random order and this feature only can active at CD
STOP mode. If a disc is playing, press the STOP button to stop playback.
2) Display will show a random track number few
seconds then return to the correct time and
RANDOM indicator will comes “on”.
1) Press RANDOM button once, the until will start to play automatically with random
mode.
1) Press the PROGRAM button. The PROGRAM
indicator flashes and the display briefly shows
“ ” with “ ” flashes indicating that you can
select the first track to be programmed.
2) Press the or buttons to select the first
track. The desired track number flashes on
the display.
3) After each track has played once the player stops automatically.
To cancel random playback at any time, press the STOP button.
Programmed Playback
The CD player in this unit has a 20 track programmable memory which allows you
to program any disc to play just the tracks you want to hear in the exact order that
you want to hear them. You may program a track or tracks to play more than once if
desired.
Note: Programming can only be done while the player is in the Stop mode. If
a disc is playing press the STOP button to stop playback before performing the
programming steps below.
3) Press the PROGRAM button again. The selected
track is entered in program memory number 01
and the display advances to “ ” with “ ”
flashes indicating that you can select the next
track to be programmed.
5) Repeat step 4 to program up to 20 tracks in the memory.
6) After you have programmed all the desired tracks, press the PLAY / PAUSE
button to begin programmed playback. The PROGRAM indicator flashing. Play
back will begin from the first track you programmed and continue until all
programmed tracks have been played. Display return to correct time after few
seconds.
4) Press the or buttons to select the next track to be programmed, and press
the PROGRAM button to enter the track in the memory.
Notes:
• After all programmed tracks have been played, the player stops but the program
remains in the memory.Press the PROGRAM button and then press the PLAY
/ PAUSE button to begin programmed playback again.
• To clear the program from the memory after the disc stops, press the PROGRAM
button and then press the STOP button.Opening the CD door, pressing the POWER
button to shut the unit ‘Off’, or by switching to the other function also clears the
program.
Press PLAY / PAUSE to begin Program Repeat playback.
Program Repeat Playback
You may use the Program and Repeat features together to repeat a programmed
sequence of tracks.
Simply enter the desired tracks in the program memory as described, then press the
REPEAT button twice to select ‘All Tracks Repeat’.
The REPEAT indicators will both come “on” and
PROGRAM indicator flashes.
Line In Jack (Connection Cable Not Included)
This unit includes an LINE IN jack to allow you
to connect external devices, such as an
iPod
® or portable MP3 player, and listen to the
music stored on your external device through
the speakers of this unit.
Connect the headphone jack of your external
device with the LINE IN jack located on the left
side of this unit. The connected cable is not
included.
2008-1-11, 15:49 8