Classe Audio SSP-300 User Manual
Page 19
19
7
Sit back and enjoy some music or a movie while reading the rest
of this manual.
It is important that you become familiar with the full capabilities of your
new surround processor if you are to get maximum value from your
purchase. (Alternatively, you may prefer to have your dealer perform a
comprehensive installation of the system, leaving the technical details to
the professionals.)
For example: the default settings of the bass management system in
the SSP-300 are to divert any bass below 80 Hz, in any channel, to the
subwoofer output. This is a reasonably safe choice, since few loudspeakers
that are likely to be used with equipment of the SSP-300’s caliber are going
to be stressed by these settings.
However, these setting may not be optimal for your particular loudspeaker
systems. Your dealer can assist you in determining the best configuration of
the bass management system for your specific situation.