Classe Audio SSP-300 - Manual (Page 51)

51
teach IR
The SSP-300 provides discrete infrared (IR) command codes for all its functions,
a list that extends far beyond what is required by normal remote controls.
However, many of these functions are critical if you plan to create a customized
remote control with macros that take command of your entire system. Without
these discrete codes, many of the macros you might want to create will simply
not work reliably.
The teach IR screen provides a scrolling list of all the available IR codes in the
SSP-300. By scrolling to the command you need to learn into your macro-
capable remote, and then pressing the send IR code button, the SSP-300 will
send the appropriate command code out its front panel–where it can be learned
by your third-party remote control.
For more information on such control systems, we recommend you speak with
your authorized Classé dealer.
display setup This button brings up the display setup menu. It allows you to configure the
SSP-300’s LCD screen brightness, the display timeout, and the language used
in the touchscreen and menu system. It also determines the format of your
OSD (on-screen display), how long the temporary display lasts on your main
television (e.g., the message that appears on your television when you change
inputs or volume), and how volume settings are displayed on your system.