Classe Audio SSP-300 - Manual (Page 30)

30
19 AC Mains Power Switch
The main power switch for the SSP-300 is adjacent to the receptacle for
the power cord.
Switching the unit on puts it in standby mode. The surround processor
should be in standby before being switched off.
Danger! Potentially dangerous voltages and current capabilities exist
within your surround processor, even when disconnected
from AC mains. Do not attempt to open any portion of the
surround processor’s cabinet. There are no user-serviceable
parts inside your surround processor. All service of this
product must be referred to a qualified authorized Classé
dealer or distributor.
20 AC Mains Input
An IEC standard power cord (supplied) is used with the SSP-300. Plug the
cord into the IEC receptacle provided, and the other end into a suitable
wall outlet.