Futaba 7C 2.4GHz - Manual (Page 26)

MODEL COPY: copies the current model data into another model memory in the transmitter.
The number of the model memory you are copying from and into is displayed.
Notes:
•
Any data in the model copied to will be written over and lost, including name and type.
It cannot be recovered.
Examples:
•
Start a new model that is similar to one you have already programmed.
•
Copy the current model data into another model memory as a backup or before experimenting with new settings.
•
Edit a copy of your model’s data to fly the model in different conditions (i.e. Helicopter using heavier weight blades;
airplane model at extreme altitudes).
GOAL of EXAMPLE: STEPS: INPUTS:
*Radio shows progress on screen as the model memory is being copied. Note that if the power switch is turned off prior to completion,
the data will not be copied.
26
Copy model 3 into model 5.
NOTE: This is one of several
functions for which the radio requires
confirmation to make a change.
Where next?
Open the BASIC menu, then open
MODEL submenu.
Confirm you are currently using the
proper model memory. (Ex: 3)
Go to MODEL COPY and choose the
model to copy into. (Ex: 5)
Confirm your change.
Close.
for 1 second. (If ADVANCE, again.)
to MODEL.
If SELECT does not indicate 3,
use MODEL SELECT, p. 25.
to 5.
for 1 second.
sure? displays. *
SELECT the copy you just made: see p. 25.
Rename it (it is currently named exactly the same as the model copied): see p. 27.