Futaba 7C 2.4GHz - Manual (Page 29)

MODEL TYPE: sets the type of programming used for this model.
The 7C has 10 model memories, which can each support:
•
One powered aircraft (ACRO) memory type (with multiple wing and tail
configurations. See FLAPERON, ELEVON and V-TAIL for further information.);
•
Six helicopter swashplate types, including CCPM. See Helicopter MODEL TYPE
for details, p. 61.
Before doing anything else to set up your aircraft, first you must decide which MODEL TYPE best fits this particular aircraft.
(Each model memory may be set to a different model type.) If your transmitter is a 7CA, the default is ACRO. If it is a 7CH,
the default is H-1.
If you are using a heli MODEL TYPE, please go to that chapter now to select the proper model type and support
your model setup. Note that changing MODEL TYPE resets all data for the model memory, including its name.
GOAL of EXAMPLE: STEPS: INPUTS:
29
Select the proper MODEL TYPE for your
model. Ex: ACRO.
[NOTE: This is one of several functions
that requires confirmation to make a
change. Only critical changes require
additional keystrokes to accept
the change.]
Open the BASIC menu, then open the
PARAMETER submenu.
Go to MODEL TYPE.
Select proper MODEL TYPE.
Ex: ACRO.
Confirm the change. Close PARAMETER.
Turn on the transmitter.
for 1 second.
(If ADVANCE, again.)
then to highlight PARAMETER.
to choose PARAMETER.
to TYPE.
to ACRO. for 1 second.
sure? displays. to confirm.
to return to BASIC menu.