FXpansion BFD Supplemental - Manual (Page 15)


Output controls (see ref. manual section 10:3)
BFD comes in a variety of output configurations:
BFD Stereo (Stereo output)
BFD Groups (Group outputs: 4 stereo)
BFD All (All outputs: 3 stereo and 11 mono)
BFD Ultra (6 stereo and 22 mono outputs)
Depending on which version you launch, the Output Options panel (see ref. manual
section 10:2) will give you a variety of routing options for the mic channels in BFD.
Bleed controls
The Bleed controls offer global manipulation of the bleed mic channels in BFD’s Kit-
Pieces.
• You can adjust the levels of bleed in the kick, snare and multi (only effective on some
BFD XFL Kit-Pieces) mic channels.
• The Bleed to primary direct option routes all bleed signals for a Kit-Piece to the output
to which the primary direct mic channel is routed.
Output Matrix
The Matrix which dominates the Output Options panel allows you to route any mic
channel (primary direct, bleed and ambient mic channels) in any Kit-Piece to any
available output.
• Each mic channel in each Kit-Piece slot is represented by a cell in the Matrix. Clicking
the cell results in a drop-down menu appearing, from which you can select any available
output.
Please see page 68 of the reference manual for an example of how you can use the
output routing.
BFD supplemental manual Chapter 3: Tutorial