Required tools and equipment – Cisco XR 12000 Series User Manual
Page 122
Advertising
3-4
Cisco XR 12000 Series Router SIP and SPA Hardware Installation Guide
OL-17438-04
Chapter 3 Preparing to Install a Shared Port Adapter or a SPA Interface Processor
Required Tools and Equipment
Warning
For safety, periodically check the resistance value of the ESD strap. The measurement should be
between 1 and 10 megohms.
Required Tools and Equipment
You need the following tools and parts to remove and install SIPs:
•
Flat-blade or Phillips screwdriver
•
ESD-preventive wrist or ankle strap and instructions
•
Interface cables to connect the SIP with another router or switch
Advertising