Cisco XR 12000 Series - Manual (Page 46)

2-16
Cisco XR 12000 Series Router SIP and SPA Hardware Installation Guide
OL-17438-04
Chapter 2 Overview: Cisco XR 12000 Series Router Shared Port Adapters
1 Port 10-Gigabit Ethernet SPA Overview
XFP Port Cabling Specifications
Table 2-13 shows the port cabling specifications for an XFP module.
Table 2-12 XFP Module Specifications for 10-Gigabit Ethernet SPA
Specification Description
Wavelength (TX) 10GLR SR-1: 1260 nm to 1355 nm
10GER IR-2: 1530 nm to 1565 nm
10GZR LR-2: 1530 nm to 1565 nm
10G-MM-SR: 840 nm to 860 nm
Cabling distance (maximum) 10GLR SR-1: 6.2 miles (10 km)
10GER IR-2: 24.8 miles (40 km)
10GZR LR-2: 50 miles (80 km)
10G-MM-SR: 26m, 33m, 66m, 82m, 300m
Operating case temperature range 10GLR SR-1: 23 to 158 degrees F (–5 to 70 degrees C)
10GER IR-2: 23 to 158 degrees F (–5 to 70 degrees C)
10GZR LR-2: 23 to 158 degrees F (–5 to 70 degrees C)
10G-MM-SR: 32 to 158 degrees F (0 to 70 degrees C)
Storage temperature range 10GLR SR-1: –40 to 185 degrees F (–40 to 85 degrees C)
10GER IR-2: –40 to 185 degrees F (–40 to 85 degrees C)
10GZR LR-2: –40 to 185 degrees F (–40 to 85 degrees C)
10G-MM-SR: –40 to 185 degrees F (–40 to 85 degrees C)
TX power 10GLR SR-1: –8.2 to 0.5 dBm
10GER IR-2: –4.7 to 4 dBm
10GZR LR-2: 0 to 4 dBm
10G-MM-SR: 3dBm,-1.5dBm,-1dBm
Receiver sensitivity (maximum) 10GLR SR-1: –12.6 dBm
10GER IR-2: –14.1 dBm
10GZR LR-2: –24 dBm
10G-MM-SR: -11.1dBm
RX overload 10GLR SR-1: 0.5 dBm
10GER IR-2: –1.0 dBm
10GZR LR-2: –7.0 dBm
10G-MM-SR: 1.0 dBm
Maximum receiver power damage 10GLR SR-1: +5 dBm
10GER IR-2: +5 dBm
10GZR LR-2: +5 dBm
10G-MM-SR: -1dBm
Table 2-13 XFP Port Cabling Specifications
XFP Module Wavelength Fiber Type
XFP-10GLR-OC192SR 1310 nm SMF
XFP-10GER-OC192IR 1550 nm SMF
XFP-10GZR-OC192LR 1550 nm SMF
XFP-10G-MM-SR 850 nm MMF