Cisco XR 12000 Series - Manual (Page 18)

1-6
Cisco XR 12000 Series Router SIP and SPA Hardware Installation Guide
OL-17438-04
Chapter 1 Overview: Cisco XR 12000 Series Router SPA Interface Processors
Cisco XR 12000 SIP-600 Overview
Cisco XR 12000 SIP-600 LEDs
The Cisco XR 12000 SIP-600 supports 2 single-width, double-height SPAs, 2 single-width,
single-height SPAs, or 1 dual-width, double-height SPA. The Cisco XR 12000 SIP-600 face plate has
one Status LED.
Figure 1-2 shows the Cisco 12000 SIP-600 face plate with 2 single-width, single-height
SPAs.
Figure 1-2 Cisco XR 12000 SIP-600 Face Plate
The Cisco XR 12000 SIP-600 LEDs are described in Table 1-4 .
Cisco XR 12000 SIP-600 Physical Specifications
The Cisco XR 12000 SIP-600 physical specifications are shown in the following table.
SPA Subslot Numbering on the Cisco XR 12000 SIP-600
The Cisco XR 12000 SIP-600 accepts 2 single-width SPAs or 1 dual-width SPA.
1 SPA subslot 0 3 Ejector Levers
2 SPA subslot 1 4 Status LED
ST
AT
US
1 0
12000-SIP-600
116871 3
1 2
3 4
Table 1-4 Cisco XR 12000 SIP-600 LEDs
LED Label Color State Meaning
Status Yellow On SIP is powered and IOS is loading.
Green On SIP is active.
Table 1-5 Cisco XR 12000 SIP-600 Physical Specifications
Description Specifications
Physical dimensions Occupies one line card slot on a Cisco 12000 Series Router
Shipping weight 10kg
Operating temperature 32 to 104°F (0 to 40°C)
Relative humidity 10 to 90 percent, noncondensing
Storage temperature –4 to 149°F (–20 to 65°C)