Compatible Systems INTRAPORT 2+ - Manual (Page 36)

30 Chapter 6 - Basic Configuration Guide
without receiving any traffic from a client belonging to
this VPN Group Configuration without ending the tunnel
session.
• Set the Minimum Client Version or keep the default
value. This places a limit on the VPN Client Software ver-
sion number which will be allowed to connect.
Leave all other parameters at their default settings for basic
configuration, or refer to the CompatiView Management Soft-
ware Reference Guide for more advanced configuration set-
tings.
VPN Group Configuration: IKE Configuration Tab
E. On the IKE Configuration Tab, select the authentication and
encryption algorithms to be used for tunnel sessions.
v Note: STEP/STAMP (Compatible System’s proprietary tunnel negoti-
ation protocol) encryption parameters may be set using the Manual
Tab. This can be used to allow connections from users running
older versions of the VPN Client software, but is not recommended
for other VPN Groups.
• Click on the Add... button in the Transform section to access
the IKE Configuration Transform List dialog box: