Power windows – HONDA 2007 Ridgeline - Owner's Manual User Manual

Page 110

Advertising
background image

If the driver’s

window senses any obstacle while it
is closing automatically, it will
reverse direction, and then stop. To
close the window, remove the
obstacle, then use the window switch
again.

Auto reverse stops sensing when the
window is almost closed. You should
always check that all passengers and
objects are away from the window
before closing it.

Your vehicle has a power back
window.

This indicator comes on when you
turn the ignition switch from the ON
(II) to the ACCESSORY (I) or LOCK
(0) position without closing the back
window. With the ignition switch in
the ACCESSORY (I) position, the
indicator goes off after about 30
seconds. With the ignition switch in
the LOCK (0) position, the indicator
goes off after about 3 minutes.

If the driver’s window fuse is
removed, the AUTO function may be
disabled. The power window system
needs to be reset after reinstalling
the fuse.

Start the engine. Push down and
hold the driver’s window switch
until the window is fully open.

Pull and hold the driver’s window
switch to close the window
completely, then hold the switch
for about 2 seconds.

If the power windows do not operate
properly after resetting, have your
vehicle checked by your dealer.

1.

2.

AUTO REVERSE

Back Window

Back Window Open
Indicator

Power Windows

106

Main Menu

Table of Contents

Advertising