Installing a child seat – HONDA 2007 Ridgeline - Owner's Manual User Manual

Page 51

Advertising
background image

Route the tether strap downward
properly, making sure the strap is
not twisted.

Attach the tether strap hook to the
outer tether anchor on the outside
of the seat bottom.

Make sure to attach the tether strap
hook to the anchor before installing
the child seat, because the tether
anchor is positioned behind the child
seat.

Place the child seat on the rear
seat.

Push down the rear center head
restraint to the lowest position.

Route the tether strap over the
seat-back, lift the cover, then hook
the tether strap through the upper
guide as shown.

Route the tether strap downward
properly along the seat-back,
making sure the strap is not
twisted.

Tighten the strap according to the
seat maker’s instructions.

1.

2.

3.

4.

5.

3.

4.

CONTINUED

Installing a Child Seat

Using the Center Tether Anchor

Dr
iv

er
and

P

asseng

er
Saf

e

ty

47

UPPER GUIDE

CENTER TETHER ANCHOR

Main Menu

Table of Contents

Advertising