Cruise control – HONDA 2007 Ridgeline - Owner's Manual User Manual

Page 170

Advertising
background image

You can decrease the set cruising
speed in any of these ways:

If you need to decrease your

speed quickly, use the brakes as you
normally would.

Press and hold the SET/DECEL
button. Release the button when
you reach the desired speed.

To slow down in very small
amounts, tap the SET/DECEL
button. Each time you do this,
your vehicle will slow down about
1 mph (1.6 km/h).

Tap the brake pedal lightly with
your foot. The CRUISE
CONTROL indicator on the
instrument panel will go out.
When the vehicle slows to the
desired speed, press the SET/
DECEL button.

You can increase the set cruising
speed in any of these ways:

Press and hold the RES/ACCEL
button. When you reach the
desired cruising speed, release the
button.

To increase your speed in very
small amounts, tap the RES/
ACCEL button. Each time you do
this, the vehicle will speed up
about 1 mph (1.6 km/h).

Cruise control may not hold the set
speed when you are going up and
down hills. If your speed increases
going down a hill, use the brakes to
slow down. This will cancel cruise
control. To resume the set speed,
press the RES/ACCEL button. The
indicator on the instrument panel will
come back on.

When climbing a steep hill, the
automatic transmission may
downshift to hold the set speed.

Push on the accelerator pedal.
Accelerate to the desired cruising
speed, then press the SET/
DECEL button.

Changing the Set Speed

Cruise Control

166

NOTE:

Main Menu

Table of Contents

Advertising