Interlogix UltraView ProBridge 2 - Manual (Page 16)

Calibur Kalatel KA2 ProBridge 16 0150-0217B
Using Calibur Keypads
Keyboards (CBR-KB3/J and KTD-405) are typically used to provide initial
configuration of the Kalatel PTZ unit for setting PTZ addresses and presets.
Please refer to the installation manual for the respective keyboard for setup and
use with Kalatel PTZ units.
In some specific cases keyboards may be used in conjunction with
the CBR-PB2-KA2 units where multiple Calibur units are being
controlled via one or more local Keyboard. Available keyboards
are only involved when an RS-485 is configured with CBR-KB2/J,
CBR-KB3/J and KTD-405 Keyboards. Please contact Technical
Support for additional instructions concerning these special
installations. NOTE