Interlogix UltraView ProBridge 2 - Manual (Page 4)

Calibur Kalatel KA2 ProBridge 4 0150-0217B
1 KA2 ProBridge
1.1 Kalatel KA2 ProBridge Description
The Kalatel CBR-PB2-KA2 is a specific ProBridge unit for interfacing the DVMRe
family of digital video multiplex/recorders to Kalatel PTZ Cyberdomes where local
keyboard control is not already provided via a CBR-KB3 or KTD-405 keypad.
The CBR-PB2-KA2 combines into a single unit the services of both a CBR-PB2-
KAL and a KTD-410 previously required for all Cyberdome installations. Due to
all services being provided via a single unit this new configuration is less
expensive and easier to install.
1.2 Compatibility
The CBR-PB2-KA2 is compatible with all Calibur by Kalatel systems equipped
with RS-485 network capabilities except installations with a CBR-KB1 Keypad.
Compatible units include the Calibur DVMRe digital video units and various
Calibur Multiplexer models. Please check the specifications of the particular
Calibur product for RS-485 network support.
Kalatel Components:
(1) CBR-PB2-KA2 ProBridge. This product includes:
•
(1) CBR-PB2-KA2 ProBridge unit.
•
(1) P/N 4310-0034: RJ45 to RJ45 cable. Connects the ProBridge to
RS-485 Network. This cable is 6’ in length.
•
(1) P/N 4310-0032A Cable from PB2 to Receiver/Dome
•
(1) P/N 4010-0007: 12VDC 120VAC Power Supply or
(1) P/N 4010-0008: 12VDC 220VAC Power Supply.
•
(1) P/N 0150-0217A: Product Overview and Installation Manual.
1.3 Installation Environment
Power: Ensure that the installation site’s AC power is stable and within the rated
voltage of the external power supply. If the site’s AC power is likely to have
spikes or dips, use power line conditioning or an Uninterruptible Power Supply.
Temperature: Observe the unit’s ambient temperature specifications when
choosing a location for the unit. Extremes of heat or cold beyond the specified
operating temperature limits may cause the unit to fail. Do not install this unit on
top of other hot equipment.
Moisture: Do not expose the unit to rain or moisture. Moisture can damage
internal components. Do not install this unit near sources of water.
RS485 Limitations: Total length of the RS-485 network is limited to 3000’.