Accessing the sdhc card – Interlogix TruVision IP Open Standards Dome Cameras Installation Manual User Manual
Page 9
Installation Manual
9 EN
Figure 4: External alarm output
Wedge dome camera connections
Figure 5: Wedge dome camera connections
1.
Power input connector
Connect +12 VDC power supply.
2.
Ethernet RJ45 PoE connector
Connect to the network devices.
3. Lens
4. Power
LED
5. Lens
positioning
screws
6.
Network status LEDs
7. Reset
switch
Click to reset all parameters to
factory default.
Accessing the SDHC card
Insert an SDHC card up to 32GB for local storage as a backup in case the
network fails, for example (see Figure 6 below). The card is not supplied with the
camera.
Note: The wedge dome does not support a SDHC card.
Video and log files stored on the SDHC card can only be accessed via the web
browser. You cannot access the card using TruVision Navigator or a hybrid DVR.