Interlogix TruVision IP Open Standards Dome Cameras User Manual - Manual (Page 26)

2BChapter 3: Network and streaming configuring
Parameters Description
Save captured picture as Specifies the directory for saving snapshot files. The default
directory is C:\Program Data\Web\BMPCaptureFiles.
Save playback captured
picture as Specifies the directory for saving playback files. The default
directory is C:\Program Data\Web\PlaybackFiles.
Save download file as Specifies the directory for downloaded files. The default directory is
C:\Program Data\Web\DownloadFiles.
Remote configuration
Use the “Remote configuration” panel to remotely configure the server, network,
cameras, alarms, users, transactions and other parameters such as upgrading
the firmware. See Figure 10 and Table 3 for descriptions of the configuration
folders available.
Figure 10: Remote configuration panel (Basic information menu selected)
Table 3: Overview of the Remote configuration panel
Configuration folders Description
Basic information Defines the camera name and RS-485 bus ID. This screen
also displays the MAC address, device type, device SN and
the current firmware version. See “Information about the
camera” on page 23.
Channel parameters Defines the OSD properties of camera information, recording
parameters and schedules, motion detection parameters,
image quality, alarm responses, and overlay text. See
Chapter 4 Camera configuration” on page 27.
Network parameters Defines the network parameters required to access the
camera over the internet. See “Network parameters” on page
23.
22 TruVision IP Dome Open-Standards User Manual