Interlogix IS-ZW-RC-1 - Manual (Page 5)

Scenes
A scene lets you establish preset brightness levels for multiple Z-
Wave controlled lights and then control them with one command.
This is ideal for mood or task lighting. Scene 1 could be the family
room lights set to dim for watching TV. Scene 2 could have the
same lights set to a different brightness level for other activities
like reading or entertaining.
You can set up a maximum of 19 scenes, containing up to 32
devices per scene. Scenes can include lights from different groups.
To add a device to a scene:
1. Press and hold SETUP until the screen displays LIGHT
SETUP
.
2. Scroll until the screen displays SCN SETUP, and then press
OK.
The screen displays ADD.
3. Press OK.
The screen displays SEL DIGIT.
4. Press a digit (1 to 9) for the scene to which you wish to add
the device. Press SHIFT and the digit (1 to 9) if you are adding
devices to scenes 10 through 18.
5. Press OK.
The screen displays SETUP WAITING.
6. Press the button on the device that you are adding, and
adjust the brightness level on the device within 30 seconds
(refer to the manual for the device).
The screen displays SUCCESS.
To control a scene:
1. Press SCENE to put the remote in Scene mode.
The remote will stay in this mode until the Light, Group, or All
mode is activated.
2. Press the digit key for the scene you wish to control (1 to 9).
Press SHIFT and the digit (1 to 9) if you are controlling scenes
10 through 18.
The screen displays SCENE and the digit selected.
To remove a device from a scene:
1. Press and hold SETUP until the screen displays LIGHT
SETUP
.
2. Scroll until the screen displays SCN SETUP, and then press
OK.
3. Scroll until the screen displays REMOVE.
4. Press OK.
The screen displays SEL DIGIT.
5. Press a digit (1 to 9) for the scene from which you want to
remove the device. Press SHIFT and the digit (1 to 9) if you are
removing a device from scenes 10 through 18.
6. Press OK.
The screen displays SETUP WAITING.
7. Press the button on the device you wish to remove.
The screen displays SUCCESS.
This only removes the device from a specific scene. The device is
still part of your home control network and the scene still exists (if
there were more than one device in it).
To delete a scene:
1. Press and hold SETUP until the screen displays LIGHT
SETUP
.
2. Scroll until the screen displays SCN SETUP, and then press
OK.
3. Press the right arrow key two times.
The screen displays DELETE.
4. Press OK.
The screen displays SEL DIGIT.
5. Press a digit (1 to 9) for the scene you wish to delete. Press
SHIFT and the digit (1 to 9) if you are deleting scenes 10
through 18.
The screen displays the selected scene.
6. Press OK.
The screen displays SUCCESS.
This only deletes the specific scene. All of the devices are still part
of your home control network.
Labels
Individual lights, groups, or scenes can all be labeled to help
identify their function or location in your home. The process is the
same for all three.
To create labels:
1. Press and hold SETUP until the screen displays LIGHT
SETUP
. Scroll to GROUP or SCENE if changing those labels.
2. Press OK
The screen displays ADD.
3. Scroll until the screen displays LABEL, and then press OK.
The screen displays SEL DIGIT.
4. Press a digit (1 to 9) for the light, group, or scene you wish to
rename. Press SHIFT and the digit (1 to 9) if you are renaming
10 through 18.
The screen displays the selected light, group, or scene.
5. Use the 1 On/Off key to scroll through the alphabet/numbers
until you reach the appropriate letter or number.
6. Use the right arrow key to move to the next letter and repeat
step 5.
7. Continue this process until your new label is complete.
8. Press OK.
P/N 1069507 • REV A • ISS 18NOV09 5 of 8