Cyclades AlterPath BladeManager - Manual (Page 107)

Chassis Management
AlterPath BladeManager Manual 4-25
OnDemand means that the connection is established only upon the user’s
request, and disabled again when the last user on the console/device logs out.
When disconnected, no data buffer or alarm is available.
>> Selecting the Group(s) to Access a Chassis
To select one or more groups to access a chassis:
1. From the menu, go to Devices > Details > Groups.
The system displays the Devices - Groups tabbed form:
2. Select (or highlight) from the left list box the device group that the current
chassis supports.
Note: Unless a device is configured for another group, the Device group is
the default group for all devices.
3. Click on Add.
4. Repeat steps 2 and 3 if you have another group to add.
Note: To delete any entries from the Selected Groups box, highlight the
group you wish to delete and then click on Delete.
5. Click on Save to save your configuration.