Cyclades AlterPath BladeManager - Manual (Page 48)

2: BladeManager Installation
2-24 AlterPath BladeManager Manual
Front LEDs/Buttons Function
CD-eject button Press this button to release a CD from the
CD-ROM.
CD-ROM drive activity
LED When lit, it indicates that the CD-ROM
drive is in use.
Diskette drive activity LED When lit, it indicates that the diskette
drive is in use.
Diskette-eject button Press this button to release a diskette from
the diskette drive.
System-error LED When lit, it indicates that a system error
has occurred.
System-locator LED Use this blue LED to visually locate the
BladeManager if it is in a location with
numerous other servers. If your server
supports IBM director, you can use IBM
Director to light this LED remotely.
Hard disk drive activity
LED When flashing, it indicates that a hard
disk drive is in use.
Power-on LED When lit and not flashing, it indicates that
the server is switched ON. When flashing,
it indicates that the server is switched OFF
and still connected to an AC power
source. When off, it indicates that AC
power is not present, or the power supply
or the LED itself has failed.
If this LED is off, it does not mean that
there is no electrical power in the
BladeManager. The LED might be burned
out. To remove all electrical power from
the server, you must disconnect the power
cord from the electrical unit.