Installing a scsi hard drive – Cyclades AlterPath BladeManager User Manual

Page 40

Advertising
background image

2: BladeManager Installation

2-16

AlterPath BladeManager Manual

Installing a SCSI Hard Drive

To install a SCSI hard drive, complete the following procedure:

NOTE: If you have only one hard disk drive, install it in the left drive bay.

1. Review the safety installation guidelines at the beginning of this chapter.

2. Switch off the server and peripheral devices; disconnect the power cord

and all external cables.

3. Remove the cover.

4. Press the release tabs on the bezel and pull the bezel away from the server.

5. Slide the drive tray out of the server, and then position the drive on the

drive tray.

6. Secure the drive using the screws that come with the option.

7. Slide the drive tray back into the server.

8. Connect the signal and power cables to the drive

Advertising