Cyclades AlterPath BladeManager - Manual (Page 182)

5: Advanced Configuration
5-20 Alterpath BladeManager Manual
If the BladeManager goes down, you will still have direct access to ports and
consoles, but you will need to redefine the devices.
Changing the Database Configuration
Caution: This configuration procedure is for advanced users only.
You can change the default configuration values from the properties file (/var/
apm/apm.properties).
Restoring Your Configuration
If during a configuration upgrade, the system displays an error or failed
message, you can check the log file (/var/log/conf-V_[version number]log)
and decide whether to restore the original configuration.
For example, if you are upgrading your configuration from V_1.2.1 to 1.3.0,
then the log file to check is: /var/log/conf-V_1.3.0.log
To restore the previous configuration:
restconf config.tgz.old
Property Name Default
Property
Value If you change the
default property value,
ensure that . . .
db.apm apmdb The system creates a
corresponding database.
db.apm.user apm The system creates a
corresponding database
user.
db.apm.pw apmdb
db.apm.max_connectio
ns 10 max_connections in my.cnf
file is set to greater or equal
to
db.apm.maxconnectiuons
value.
db.apm.host localhost the new host is available on
the network.