Vertical Communications and FX Series - Manual (Page 26)

3.7 Camping On At a Busy Station And
Waiting For An Answer (Call Waiting)
If the telephone you have called is busy, you can send a call-waiting
message to the telephone and wait on the line for an answer (you must be
using the handset for this feature to work.)
•
To activate call waiting when you hear a busy signal,
1. Dial ✳ 6 (called party hears tone).
2. Wait on line for reply.
3. Called party can place the current call on hold or disconnect from
the call to answer your call-waiting tone, or ignore you
call-waiting tone and continue current conversation.
•
To cancel call waiting,
1. Press INTERCOM, then dial # 6.
2. Hang up or press SPEAKER to end.
•
To answer a call-waiting tone if you receive one while on a call,
1. Hear short burst in handset receiver.
2. You may choose to ignore the call-waiting tone and remain on
line with your original caller,
—OR—
complete present call and hang up handset (waiting call will
begin ringing). Lift handset to answer waiting call.
Making Calls GCA70–198
3 – 6 LCD Station User's Guide