Vertical Communications and FX Series - Manual (Page 31)

4.2 Using Call Park
•
To park a call,
1. When on a line, press INTERCOM.
2. Dial S, then dial park orbit access code (91–99 for orbit 1–9). If
chosen orbit is busy, dial a different orbit number.
3. Hang up handset.
4. Remember the code for later use or make it known to those who
need to know it in order to retrieve the call.
NOTE: If no one retrieves the call within a programmable time limit, it
reverts to the parking station as a standard held call. You can
place only one call in an orbit at a time.
•
To retrieve a parked call,
1. From any station, press INTERCOM.
2. Dial #.
3. Dial park orbit access code (91–99), or press preprogrammed
PARK button.
4. Answer call.
GCA70–198 Placing Calls On Hold
LCD Station User's Guide 4 – 3