Vertical Communications and FX Series - Manual (Page 39)

Conferencing Calls
7.1 Conferencing Stations Together
•
To set up a conference call that includes any combination of
outside lines and intercom parties,
1. Make first call.
2. Press TRANSFER/CONFERENCE (this places the on hold).
3. Select next line and make next call.
4. Press TRANSFER/CONFERENCE to establish conference.
5. Repeat the last three procedures to add up to two more parties for
a 5-party conference (including yourself) when using the DXP
system.
NOTE: When using a DXP Plus system, you can have up to seven
parties (including yourself) on a conference call.
•
To retrieve a line from hold and bring that party
into the conference,
1. Press TRANSFER/CONFERENCE.
2. Press line button.
3. Press TRANSFER/CONFERENCE.
NOTE: If all conference circuits are busy, you will not be able to add a
party to the conference. The message “Conference Full” will
appear in your display.
7
GCA70–198 Conferencing Calls
LCD Station User's Guide 7 – 1