Vertical Communications and FX Series - Manual (Page 29)

Placing Calls On Hold
4.1 Holding Calls
•
To place a call on hold,
1. Press HOLD.
2. Hang up handset.
•
To return to a call that is on hold,
1. Lift handset and press line button with flashing light,
—OR—
press TAP.
•
To place a call on exclusive hold,
1. Press HOLD twice and hang up handset.
•
To retrieve an exclusive hold,
1. Press line button of held call (button with flashing light),
—OR—
press TAP (if station does not have line appearance).
•
To place a call on hold at another telephone,
1. While on line, press INTERCOM (system places call on hold ).
2. Dial ✳ 90, then dial extension number of telephone to receive
held call.
3. Hang up handset.
4
GCA70–198 Placing Calls On Hold
LCD Station User's Guide 4 – 1