Vertical Communications and FX Series - Manual (Page 52)

9.10 Setting The Volume Control
•
There are four ringer loudness levels (plus an off position). Set
the level as follows:
1. While your telephone is on hook and idle, press VOLUME UP or
VOLUME DOWN once for each change in loudness that you
desire. The ringer sounds once for each change as an example of
the current setting. Your selection becomes the new default
setting and will result in your telephone ringing at that level for
all future calls (until you change the default by repeating the
above procedure).
NOTE: If you set the ringer to the “off” position, your telephone will
sound a short ring burst once for each call you receive at your
station while the ringer is off.
•
There are eight speaker loudness levels. Set the level for the
current call as follows:
1. While on a call and in speakerphone mode, press VOLUME UP
or VOLUME DOWN once for each change in loudness that you
desire.
•
There are eight background music loudness levels. Set the level
as follows:
1. While background music is on at your station, press VOLUME
UP or VOLUME DOWN once for each change in loudness you
desire. This level will remain set for background music until you
change it again, even if you turn off the feature and then
reactivate it.
•
There are eight handset loudness levels. Set the level for the
current call as follows:
1. While on a call and in handset mode, press VOLUME UP or
VOLUME DOWN once for each change in loudness that you
desire.
Using The Other Features GCA70–198
9 – 6 LCD Station User's Guide