Country Home Products 18 HP - Manual (Page 20)

16 DR ® 18 and 19 HP ROAD-TOWABLE CHIPPER
Attaching the Hitch Arms and Hitch Assembly
Tool Needed:
•
(2) 3/4" Wrench or Socket
1. Attach the two (2) Hitch Arms to the Trailer Frame using the two (2) Hitch Arm Mounting Plates
and four (4) 1/2"-13 x 1-1/4" Bolts (Figure 2). DO NOT tighten the bolts at this time.
2. Attach the Trailer Hitch Assembly to the Hitch Arms with two (2) 1/2"- 13 x 3" Bolts and two (2)
1/2"- 13 Lock Nuts (Figure 2). Tighten all of the hardware.
3. Slide the Trailer Stand up through the holes in the Hitch Assembly and secure with the Hairspring
Cotter Pin (Figure 2).
Figure 2
Hitch Plate (2)
Hitch Arm (2)
1/2" x 1-1/4" Bolt (4)
1/2" x 3" Bolt (2)
1/2" Lock Nut (2)
Trailer Hitch Assembly
Trailer Stand
Hairspring Cotter Pin