Maintaining the dr road-towable chipper, Chapter 5, Regular maintenance check list – Country Home Products 18 HP User Manual

Page 35

Advertising
background image

CALL

TOLL

FREE

1-800-DR-OWNER 31

CHAPTER 5

MAINTAINING THE DR ROAD-TOWABLE CHIPPER

This chapter covers regular maintenance procedures that will ensure the best performance and long life of
your DR ROAD-TOWABLE CHIPPER. For engine maintenance, please refer to the Engine Owner’s Manual
that came with your machine. Service intervals listed in the checklist below supercede those listed in the
Engine Owner’s Manual.


BEFORE PERFORMING ANY MAINTENANCE PROCEDURE OR INSPECTION, STOP THE ENGINE, WAIT FIVE
(5) MINUTES TO ALLOW ALL MOVING PARTS TO COME TO A COMPLETE STOP AND COOL. DISCONNECT
THE SPARK PLUG WIRES, KEEPING THEM AWAY FROM THE SPARK PLUGS.

Regular Maintenance Check List

NOTE: Service intervals shown are considered maximum under normal operating conditions. Increase frequencies

under extremely dirty or dusty conditions.


Procedure

Before Each Use

Every 8-10

Hours

Every 40

Hours

Every 100

Hours

Check Engine Oil Level

Check General Equipment Condition

Check that the Shaft turns freely, see page 28

Inspect Knife for damage

Check Knife and Wear Plate for Sharpness

Check Knife and Wear Plate Attach Screws

Check Side Bearing Collar Set Screws

Check Knife to Wear Plate Gap

Lubricate Side Bearings

Check Belt Tension and Condition

1

st

time 1 hour

Clean Engine Exterior and Cooling Fins

Check the Battery Voltage

Check the Tire Pressure

Change Engine Oil and Filter*

1

st

time 5 hours

Replace Drive Belt

Replace Spark Plugs

Replace Air Filter and Precleaner

* The engine on your DR ROAD-TOWABLE CHIPPER may not have a Precleaner or Oil Filter.

Advertising
This manual is related to the following products: